Flame Arresters for Oil and Gas Safety

Flame arresters are safety equipment used to stop the spread flame of flammable gas or liquid. Flame arresters are applied in petrochemical industry,then widely used in mine, water transportation,chemical industry and so on.

Properties of the flame arrester:

The flame arrester consists of its coat, flame arresting core and its attachments. Using flame que-nching,when the flame and hot gas pass through the flame arrester very quickly, they cool sufficiently. The flame arrester can be applied to combustible gas transportation system, combustiblegas and liquid storage tanks and so on. They can be installed in the combustible gas transferringnetwork to stop deflagration.

Main specialties:

Having been tested by some authorities, the flame arrester meets the requirement of GB13347-92. Advanced technologies from England and Germany have been adopted, combined with advancedequipment and perfect testing devices, the corrugated-core flame arrester is reliable, efficient an deasy to clean.

Technological parameters:

Coat: carbon steel,Al alloy,stainless steel (SUS304,SUS304K,SUS316,SUS316L)

Flame arresting core: stainless steel explosion-proof corrugated flame arresting plates

Materials for seal ring:PTFE

Temperature:no more than 480℃

Explosion proof grade: BS 5501:II C

Application: Petrochemical products of which storage ignition point is smaller than 60℃

Matches the breather valve,can be used separately as well.

On the snorkels of the inner floating roof oil tank

On the snorkels of the gas station's underground oil tank.

Flange standard: GB,HG,SH,HGJ,JB,ANSL,JIS,etc. (As required. Pressure grade needed,)

Producing and Testing Standard: GB5908-86,GB 13347-92,or as appointed.

Maintenance:

1.The flame arresters should be checked every 6 months.

2.Blocked flame arresting cores should be cleaned,and broken flame arresting layers should bechanged.

3.The joint surface should be rigorous when reinstalling the flame arresting layer cores.